Description

The SC30TX is a pedestrian walk-behind unit. It features rubber tracks that make it more buoyant on soft surfaces. The two individually controlled tracks allow the user to work in tight spaces. Additionally, the zero-turn radius also helps with positioning at the stump. It will go 12″ below grade to prevent tripping hazards. This stump grinder features a 25-hp Kohler engine, an innovative Yellow Jacket™ cutter system, and a cutter wheel driven by a hydraulic pump- not a belt. Once the cutter wheel is engaged, it runs properly at full RPMs. Simply put, this machine gets the job done quickly. No more unsightly stumps!

SPECIFICATIONS:

ENGINE

Make and model: Kohler ECH740 EFI

Max gross horsepower: 25 hp (18.6 kW)

Max torque: 42 ft-lb (56.9 Nm)

Fuel tank capacity: 6.8 gal (25.7 L)

Fuel type: Gas

Oil volume with filter: 2 qt (1.9 L)

GENERAL

Length: 94″ (238.8 cm)

Width: 35″ (88.9 cm)

Height: 49″ (124.5 cm)

Weight: 1550 lb (703.1 kg)

TRACK DRIVE SYSTEM

Track type: Rubber 7″ (17.8 cm) width

Track length on ground: 31.4″ (79.8 cm)

Track drive pump type: Hydrostatic

System relief pressure: 2900 psi (199.9 bar)

Pump flow at max rpm: 11.4 gpm (43.2 L/min)

High-speed travel: 3.2 mph (5.1 km/h)

Ground-bearing pressure – soft ground: 3.4 psi (23.4 kPa)

CUTTER WHEEL DRIVETRAIN

Cutter wheel cut above ground: 25″ (63.5 cm)

Cutter wheel cut below ground: 12″ (30.5 cm)